Ground equipment
The fire extinguishing system "GIRS-120RB" was developed specifically for the forest and agricultural sectors with the aim of effectively fighting forest and steppe fires. The device is convenient, easy to use and economical, one fueling (gasoline) is enough for 8-10 filling stations of the extinguishing liquid, which allows in the shortest possible time to localize the fire with minimal expenditure of fire extinguishing liquid and without any special effort of the operator. The effective quenching range is 4 meters, which is sufficient in forest conditions. With a range of a fire extinguishing fluid with additives 1.5-2.0m. the efficiency of work on the fire point is increased several times. A pressure regulator, a nozzle regulator, a gas knob can control the flow rate of a fluid and thereby increase the area of the treated area several times. The sprayer is also designed for highly efficient spraying of water and aqueous solutions of various preparations for the purpose of cooling structures, degassing, disinfecting, decontaminating, sanitary and other processing. The sprayer can be extinguished with water without the addition of electrical installations that are under voltage up to 1kV inclusive from a distance of more than 1 m.
As a fire extinguishing substance GIRS use sprayed liquid (water), accelerated by supersonic (80 m / s) gas flow. The obtained gas-liquid flow can be formed in the form of a compact long-range jet or in the form of a wide torch with an opening angle of up to 50 degrees. The liquid can be supplied both continuously and in pulses with a duration of 0.2 s.
Fire extinguishing is provided by high insulating, penetrating and cooling properties of the nebulized liquid, as well as flame failure under the influence of high-speed gas-liquid flow. The absence of a solid stream of fire extinguishing solution allows you to extinguish electrical installations under voltage.
Drainage device VSU-5A, transported on an external sling of helicopters of appropriate capacity, is designed to draw water from open reservoirs (reservoir, lake, river, sea) in the hovering mode of the helicopter, deliver water to the places of fire and discharge in hover mode or translational speed.
The incendiary device AZ-4. The incendiary device AZ-4 is used to set fire to the ground cover and litter in the fight against forest fires by launching a counterfire or annealing from the support strip, as well as burning logging residues during fire clearance of cuttings, holding agricultural trees and controlled burning. With the development of a lowland forest fire to medium and especially strong intensity, when the flame height exceeds 1.5-2 meters and the speed of the edge of the fire is more than 3 m / min, direct extinguishing of the edge of the fire is impossible due to the high temperature from thermal radiation and propagation velocity. This also applies to high fires. In this situation, fire extinguishing is applied by annealing forest hot materials from natural boundaries: streams, marshes, roads, paths, or a mineralized strip is created using earth moving equipment or hand tools, at a calculated distance from the edge of a forest fire, depending on the vegetative conditions, intensity and type forest fire. After preparation of the support strip is annealed towards the edge of the fire.
Fire tanks for water (RDV-100). When access to water is limited, and in most cases this is the case, water tanks are the most necessary means to fight forest fires.
The preparation FR CROS 134 P. It is used to increase the effectiveness of extinguishing fires, when mixed with water, it increases its fire-extinguishing effect. After the treatment of vegetation and plant residues with this composition, the possibility of ignition from external factors is almost completely lost, and the fire-resistant properties remain for a long time.
Chainsaw "EFKO-136" (Italy). Used for clearing debris when approaching the fire site.
Blower sprayer AM-190 (Italy). Compactness and not a lot of weight provide ease of handling, allow you to eliminate fire in places of fire.
Specifications
Power, hp 5,0
Engine capacity, cubic see 72.4
Tank capacity for liquids, l 14
Max. fluid flow, l / min 0.5 - 3
Weight 12.5 kg
The Small Forest Patrol Fire Complex (MLPK) is intended for patrolling, transporting people and fire fighting equipment to forest ground fires and carrying out the necessary fire fighting activities associated with fire fighting ground fires. Scope - all forest vegetation zones. MLPK is designed for operation and storage without storage at ambient temperature from + 40'C to -40'C.
Equipment:
Water tank with a volume of 500 liters. 1 PC.
Motor pump "Sprut-3" complete with sleeves 1 pc.
Installation of fire-fighting high pressure (UPVD) "Ermak" 1 pc.
Wetting "PYROCOM" with tube 1 pc.
Firepack satchel RP-18 "Ermak" 5 pcs.
Blower sprayer 1 pc.
Chainsaw 1 pc.
Gas and smoke protection kit GZDK 5 pcs.
Individual medical kit (first aid kit) 5 pcs.
Axes-hoes 5 pcs.
Shovels 5 pcs.
Installation set (boxes) 2 pcs.
Lightweight fire module "Yermak", with sleeves and capacity of 1 m3 portable / trailed course
Light fire module An effective means of fighting fires in rural settlements, industrial and forestry facilities. Mobility (transported in any car), sufficient supply of water (completed with a choice of soft capacity from 600 to 4500 l), high extinguishing efficiency (motor pump output pressure 7 atm., Completed with a solid wetting agent "PYROCOM") with a small price and ease of operation make LVL "ERMAK" indispensable for equipping voluntary fire brigades and professional teams of municipalities, agricultural and forest enterprises.
Equipment:
Motor pump HP-15 1 pc.
Engine "HONDA" 5.5 liters. with.
Capacity RDV-1000 1 pc.
Mixer PYROCOM 1 pc.
Hardcore PYROCOM 5 pcs.
Suction hose (5m) 1 pc.
Sleeve pressure head 25 mm 80 m.
Sleeve pressure 38 mm 40 m.
Fire barrel 3 pcs.
Satchel pozh. "RP-18-Yermak" 1 pc.
One of the most effective devices used by both amphibious and ground units of Avialesookhrany, emergency services, forestry organizations is the Ermak fire fighting high-pressure installation. Workers with experience remember the well-established Yugoslav installation of "Kotorna." Our company supplies a version of "Ermak" of this installation, which is not inferior to imported counterparts.
The principle of operation of the installation is based on the effect of quenching with fine water under high pressure, while the water consumption is only 10-15 liters per minute. The unit is equipped with a solid wetting system, thereby increasing the quenching effect.
Mobility is provided by a movable high-pressure hose 50–75 m long. The low weight and sufficient length of the high-pressure hose ensures high mobility in extinguishing multi-storey buildings. UPVD can be transported in all cars of the brand UAZ, as well as on any truck.
Technical characteristics:
Engine: Briggs & Stratton (USA) 4-stroke, power, kW, (l / s) 4.3 (6.0)
Productivity, (l / min) 10-15
High pressure pump imp.
Pressure, (bar) 170
The range of the jet, (m) to 17
High pressure hose imp.
Hose length, (m) 50-75
Dimensions, (d / y / v) cm 55 * 55 * 55
Weight, kg 62
Knapsack forest fire extinguisher (RLO) "RP-18" Yermak" is designed to extinguish ground forest fires with water and aqueous solutions.
Technical characteristics:
Length (cm) 52
Width (cm) 36
Height (cm) 16
Water consumption (l. / Min.) 2.25
Curb Weight (kg.) 20.5
Water tank (l.) 15-18
The range of the jet, (m) 10-12
From July 2010, a forest fire extinguisher will be equipped with a novelty: a wetting tablet, which repeatedly reduces the surface tension of water, which significantly reduces water consumption in the area of fire extinguishing and increases the flame attenuation rate.
One tablet is designed for three refueling backpack fire "RP-18" Ermak "or blower" Angara ".
The housing of the hydraulic control panel can be made of duralumin alloy with a rod (the inner part) with a nickel-chrome-plated coating or of impact-resistant polyvinyl chloride plastic. On both types of hydraulics - fitting and nut made of non-ferrous metal. The advantages include a simple and convenient nozzle, easily switchable from a compact jet to spray. The original design of the shut-off valve (made of German material), embedded inside the hydraulic control, blocking the flow of the working fluid in the intervals between the working cycles. This valve design made it possible to abandon the ball valve used by other manufacturers, which reduced the product weight, dimensions, and increased convenience in operation.
The capacity of the Ermak backpack fire extinguisher consists of: - a bag of rubber MLE-6M manufactured by Ufa Plant of Elastomeric Materials, Products and Structures (UZEMIK) (in the opinion of most forestry workers of almost all regions today is the best capacity for knapsack fire extinguishers) with wide adjustable back straps made of plastic material with soft edges - a cover of durable signal-colored fabric with built-in insulating pad made of "GE” RMAFLEX "on the basis of polyethylene and pockets for hydraulic control and foaming nozzle; - necks with a net and a lid, which is also a measuring cup (volume 180 ml) for dosing the foaming liquid;
Foaming nozzle, allows you to work with all available types of foaming liquid.